----[[LIREN ELECTRICAL INSULATION MATERIALS]]

Product Show >> All Products

Altogether 131 a Product

Heat Treated Fiberglass Sleeving

Heat Treated Fiberglass Sleeving is comprised of a closely woven, highly flexible continuous filament E glass braid which has been heat-treated to remove starches and oils, and impregnated with high-temperature resistance adhesive.
This Sleeving exhibits high tensile strength, excellent flexibility and expandability resistance to moisture, fungus and chemical attack. It is non-flammable, heat resistant, and non-corrosive to metals.
Heat Treated Fiberglass Sleeving is used in mechanical and thermal protection for high temperature, low voltage applications such as toasters, coffee makers and other small heating appliances. Its flexibility and expandability allows for use over irregular shapes.

GPO-3 / UPGM203 Polyester Glass Mat Laminate Sheet

GPO-3 Polyester Glass Mat Laminate Sheet is produced by combining polyester resin with glass mat and suitable in organic fillers and laminating under heat and pressure.
This laminate is in accordance with the following international standards:
NEMA LI-1: GPO-3, IEC60893 UP GM 203, DIN 7735 HM2471/ HM2472.
GPO-3 laminates sheet offers a superior combination of electrical and mechanical properties such as dielectric strength, flame resistance, high arc and carbon track resistance, moderate heat resistance and high-impact strength. It also exhibits good retention of properties and dimensional stability at elevated temperatures.
GPO-3 Laminate Sheet is used extensively in the making of phase and end barriers, insulating supports, bus bar supports and mounting panels in switchgear and other types of electrical apparatus。

G10 & FR4 Epoxy Glass Cloth Laminated Sheets

G10 & FR4 Epoxy Glass Cloth Laminated Sheets are a kind of rigid laminated product, prepared from E-glass cloth impregnated with the modified epoxy resin.
G10 is in accordance with the following international standards:
IEC60893 EP GC 201/ NEMA LI-1: G10 / DIN 7735 Hgw 2372/ BS 3953 EP 3.
FR4 is in accordance with the following international standards:
IEC60893 EP GC 202 / NEMA LI-1: FR4 / DIN 7735 Hgw 2372.1 / BS 3953 EP-4.
G10 & FR4 Epoxy Glass Cloth Laminated Sheet exhibit high mechanical strength with good dynamic properties, very good chemical resistance as well as excellent thermal endurance properties. In addition, FR4 has excellent flame resistance (UL V-0).
G10 & FR4 Epoxy Glass Cloth Laminated Sheets can be used for a high quality construction material as well as an electrical insulation material in various machines and equipments.

G11 & FR5 Epoxy Glass Cloth Laminated Sheets

G11 & FR5 Epoxy Glass Cloth Laminated Sheets are a kind of rigid laminated product, prepared from E-glass cloth impregnated with the high temperature resistant epoxy resin. G11 is in accordance with the following international standards:
IEC60893 EP GC 203/ NEMA LI-1: G11 / DIN 7735 Hgw 2372.4 / BS 3953 EP-5.
FR5 is in accordance with the following international standards:
IEC60893 EP GC 204 / NEMA LI-1: FR5 / DIN 7735 Hgw 2372.2 / BS 3953 EP-6.
G11 & FR5 exhibit excellent thermal and chemical resistance as well as high mechanical strength at elevated temperatures. In addition, FR5 has excellent flame resistance (F V-0).
G11 & FR5 can be used for a high quality construction material as well as an electrical insulation material in various machines and equipments, especially in those areas where high mechanical strength and dynamic properties are necessary at operating temperature.

Antistatic Conductive Laminated Sheet

L884 & L885 Antistatic Conductive Laminated Sheet is a kind of rigid laminated product, prepared from E-glass cloth impregnated with the special epoxy resin mixed conductor.
This Laminated Sheet has excellent mechanical properties and shows conductivity parallel and perpendicular to the layers as well as high chemical and temperature resistance.
LR884 & LR885 Antistatic Conductive Laminated Sheet can be used as a conductive slot filler in high voltage machines and also as soldering bath carriers for printed circuits, when sensitive components have to be protected against static charges.

Phenolic Cold Punching Paper Laminated Sheets

LR207 Phenolic Cold Punching Paper Laminated Sheets are a rigid laminated product of thermal rating class E(120℃), made from pure wood pulp paper impregnated with phenolic resin by processing under heat and pressure. It is in accordance with the IEC 60893 PFCP 207.
This Laminated Sheets have good machinability and punching quality at low temperature, high mechanical and electrical properties.
LR207 Phenolic Cold Punching Paper Laminated Sheets can be used for a construction material as well as an electrical insulation material in various machines and equipments.

340 Epoxy-phenolic Glass Cloth Laminated Sheet

340 Epoxy-phenolic Glass Cloth Laminated Sheet is a rigid laminated product of thermal rating class F(155℃), constructs of E-glass cloth impregnated with the modified epoxy phenolic resin.
This Laminated Sheet has excellent thermal resistance, mechanical and electrical properties.
340 Epoxy-phenolic Glass Cloth Laminated Sheet can be used for a high quality construction material as well as an electrical insulation material in various machines and equipments.

[HOME] PREVIOUS NEXT END 15/19PAGE 7a Product/PAGE GOTO：